Roche ACCU-CHEK Inform II Manuel d'utilisateur télécharger pdf (Page 48)

The Accu-Chek Inform II System

Maintenance and Care

Cleaning and Disinfection

• Use only HVDHB approved cleaning product only to clean and disinfect the

meter, base unit and accessory box

• Remove the meter from the base unit prior to cleaning and disinfection.

• Unplug the base unit prior to cleaning and disinfection.

• Wipe the surfaces with a soft cloth slightly dampened (not wet).

• Place the meter on a level surface while wiping over the test strip port area,

making sure that no liquid enters the strip port.

• Dry the meter thoroughly after cleaning. Visually verify that no solution is

seen anywhere on the meter at the completion of cleaning or disinfection.

PAY SPECIAL ATTENTION WHEN CLEANING AND DISINFECTING

AROUND THE TEST STRIP PORT. AVOID GETTING MOISTURE IN TEST

STRIP PORT.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 58 59

Pas de commentaire

Roche ACCU-CHEK Inform II Manuel d'utilisateur Page 48