Roche Accu-Chek Active Manuel d'utilisateur télécharger pdf (Page 21)

38 39

4.3 Testing blood glucose

Check the round control window on the back of the test strip with

the colour scale printed on the test strip container. The colour of the

control window must match that of the colour interval at the top

(0 mg/dL / 0 mmol/L). If the test strip shows a different colour, do

not use it.

Hold the test strip so that the application area and arrows are facing

upwards. Gently push the test strip in the direction of the arrows

into the test strip guide

➃

of your monitor, until you hear it click into

place.

Inserting the test strip automatically puts the monitor in Test Mode.

Please remember that your monitor automatically turns off after

about 1–2 minutes of non-use (i.e. when no button is pressed).

If this happens, remove the test strip and repeat the procedure

described above with a new test strip.

Now watch the display.

015134 AccuChek Active_Eng.indd 38-39 12.08.2004, 14:54:16

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 70 71

Pas de commentaire

Roche Accu-Chek Active Manuel d'utilisateur Page 21