Roche ACCU-CHEK Inform II Manuel de l'opérateur télécharger pdf (Page 30)

Powering Up and Entering an Operator ID

Closing startup Once you have completed all the necessary changes,

■ touch to proceed to the screen used to enter

the operator ID, or

■ wait 5 seconds and the meter automatically

proceeds to the screen used to enter the

operator ID.

Entering the operator ID

How and when an operator ID is entered and if a pass-

word is required, depends on the configuration of the

system. It is also, for example, possible to require the

operator ID only when starting control tests. In general,

the system can manage and check operator IDs as well

as make additional functions ID-dependent.

If an operator name matching the entered operator ID is

available on the meter, this name will be displayed in the

Main Menu (shown here as “Maria S.”).

There are a number of options for entering operator IDs

and these depend on the configuration of the system:

■ Via barcode scanner only

■ Manually or optionally via barcode scanner

Operator IDs can consist of up to 20 alphanumeric

characters.

Alphanumeric characters are any combination of

A - Z and 0 - 9, additionally “.” (period), or “-”

(hyphen) may be used. See also page 32.

Barcode masking can be used to eliminate any

characters not belonging to the Operator ID. See

information on “Operator and patient ID barcode

masks” on page 149.

Main Menu 12:48pm

03/16/10

Review Results

Control Test

Patient Test

Maria S.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 159 160

Pas de commentaire

Roche ACCU-CHEK Inform II Manuel de l'opérateur Page 30