Roche ACCU-CHEK Inform II Manuel de l'opérateur télécharger pdf (Page 151)

General Product Information

151

Subject/Attribute Range Default Device DMS

DMS port (the port number to request

open socket from the DMS. Roche

recommends use of port numbers ≥ 1024.)

0 – 65,535 0 N Y

DNS IP (IP address of the DNS-server if

DHCP is not used and DNS is congured)

0.0.0.0 – 255.255.255.255 0.0.0.0 N Y

Gate IP (static gateway IP address) 0.0.0.0 – 255.255.255.255 0.0.0.0 N Y

WLAN settings (security)

Cipher Type (encyrption method) 0: None (no cipher type)

1: AES (symmetric key

cryptography)

2: TKIP (using dynamic

keys)

3: AES | TKIP (AES and

TKIP together)

4: WEP40 (WEP with 64

bit key length)

5: WEP104 (WEP with 128

bit key length)

0: disabled N Y

Security Type * 0: open (no security/

encryption)

1: WEP

2: WPA_PSK (WPA with

pre shared key)

3: WEP2

4: EAP**

0 N Y

* Note: Only those combinations of cipher type and security type are allowed that are listed below, see table

“Allowed combinations of cipher and security type”.

**When using option 4 ensure that an appropriate WLAN EAP package has already been downloaded from

the DMS to the meter. Within this EAP container, the appropriate EAP type (TLS, PEAP or TTLS) and the

diverse EAP conguration settings have to be congured).

SSID 0 – 32 characters “” N Y

WEP-key (40 or 104bits) NUL-terminated string of

10 or 26chs (HEX)

„00000

00000“

N Y

WEP-authentication 0: open system

authentication

1: shared key

authentication

0 N Y

WPA Key Type 0: Passphrase

1: Key

0 N Y

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 191 192

Commentaires sur ces manuels

Pas de commentaire

Roche ACCU-CHEK Inform II Manuel de l'opérateur Page 151

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Roche ACCU-CHEK Inform II