Roche ACCU-CHEK Inform II Manuel de l'opérateur télécharger pdf (Page 57)

Glucose Control Testing

Conrming or selecting the test

strip lot

Once you have entered and conrmed the lot number of

the control solution, you are asked to choose the test strip

lot number. Compare the number dis played by the meter

to the number on the label of the test strip vial.

1 Select the lot number as follows:

n To read the test strip lot number from the test strip

vial via barcode scanner, press and release

Follow the instructions for scanning IDs. *

n To use the preselected test strip lot number

displayed by the meter, touch

to conrm.

n To use a different lot number other than the one

displayed, touch

to open the keypad and

enter the number manually, or to display a list of

stored lot numbers and then select the desired lot

number from the list..

2 Touch

to conrm the selected test strip lot

number.

The meter can be congured so that manual

conrmation is not necessary. In this setup, only the lot

number is displayed. Additional options are not

available.

The meter can be congured so that lot numbers are

entered via barcode scanner only.

The meter can be congured so that lot numbers can

only be selected from a list.

For additional information about storing lot numbers for

test strips, see page 65.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 191 192

Pas de commentaire

Roche ACCU-CHEK Inform II Manuel de l'opérateur Page 57